17" Texsteel Flat Steel Wool Floor Buffer Pads (12 Pack)

Product Description

If you are an expert looking to crystallize or polish your floors, our 17 inch Textsteel steel wool floor pads are just what you need. You can use them on our 17" Floor Buffing Machine, or on any of the other 17" floor buffers that we have to offer. These Textsteel steel wool pads will strip any tough, dry, paste-wax build-up off your floors. They will also buff a parquet floor to a brilliant luster or crystallize a floor to a glossy finish.

Each pad is 3/8” thick, made from a needle-punched construction. The Textsteel pads are reversible for a longer life and will attach to the fiber brush on the bottom of any disc-type floor machine. If you need a pad that isn't as compact and won't clog up, take a look at our 17" Jumbo steel wool pads.

You must select your desired grade from the drop-down menu above. We offer 8 different levels of abrasiveness for our steel wool floor pads. The grade is determined by the thickness of the steel wool wire. Please read the descriptions below to figure out which grade you need for your application.

#0000 (Finest): For buffing and cleaning. Buffs wood, shellac, lacquer, and varnish with wax or oil.

#000 (Extra-Fine): For buffing, polishing, and removing. Buffs new wax finishes and polishes stainless steel. Removes paint drips and splatters, as well as minor burns from wood and leather.

#00 (Fine): For buffing, cleaning, cutting, and removing. Buffs final finish on painted trim. Removes old finishes with finish remover.

#0 (Medium-Fine): For cleaning and removing. Good for use on marble floors. Removes rust from metal surfaces.

#1 (Medium): For cleaning and preparing. Good for use on granite flooring. Cleans linoleum, rubber asphalt, and other resilient floors. Prepares wood for the first coat of paint and smooths raised grain.

#2 (Medium-Coarse): For cleaning and removing. Good for use on VCT floors. Cleans glass or stone surfaces. Removes scuff marks and old wax from floors.

#3 (Coarse): For removing. Removes old paint and varnish.

#4 (Extra-Coarse): For removing. Removes the toughest rust, dirt, old paint and varnish. Not recommended for high gloss surfaces or delicate finishes.

Steel Wool vs. Sand Paper Comparison Chart