17" Jumbo Steel Wool Floor Buffer Pads (12 Pack)

Product Description

These 17 inch Jumbo steel wool floor pads are the premium solution for floor care and maintenance. The pads fit on any of our 17" low-speed buffers or 17" dual-speed buffers. Jumbo steel wool pads are thick and fluffy, promoting high absorbency and minimal clogging. They are designed for maximum surface contact even at the toughest angles. Being hand-wrapped, they are constructed to eliminate scratching because there are no welds, wire stays, or stitches.

These pads are perfect for cleaning, dry scrubbing, polishing, or finishing almost any type of floor and can be shaken out to be used again and again. The weight of the floor machine keeps the steel wool pad secure once it is attached underneath. If you are looking for an even tougher pad that is more compact and less prone to tear, shred, or fray, check out our 17" Textsteel pads.

You must select your desired grade from the drop-down menu above. We offer 8 different levels of abrasiveness for our steel wool floor pads. The grade is determined by the thickness of the steel wool wire. Please read the descriptions below to figure out which grade you need for your application.

#0000 (Finest): For buffing and cleaning. Buffs wood, shellac, lacquer, and varnish with wax or oil.

#000 (Extra-Fine): For buffing, polishing, and removing. Buffs new wax finishes and polishes stainless steel. Removes paint drips and splatters, as well as minor burns from wood and leather.

#00 (Fine): For buffing, cleaning, cutting, and removing. Buffs final finish on painted trim. Removes old finishes with finish remover.

#0 (Medium-Fine): For cleaning and removing. Good for use on marble floors. Removes rust from metal surfaces.

#1 (Medium): For cleaning and preparing. Good for use on granite flooring. Cleans linoleum, rubber asphalt, and other resilient floors. Prepares wood for the first coat of paint and smooths raised grain.

#2 (Medium-Coarse): For cleaning and removing. Good for use on VCT floors. Cleans glass or stone surfaces. Removes scuff marks and old wax from floors.

#3 (Coarse): For removing. Removes old paint and varnish.

#4 (Extra-Coarse): For removing. Removes the toughest rust, dirt, old paint and varnish. Not recommended for high gloss surfaces or delicate finishes.

Steel Wool vs. Sand Paper Comparison Chart