Product Description
This Trusted Clean floor stripping recovery vacuum does a great job of recovering floor stripper and other wet materials. It is the ultimate tool for floor stripping and refinishing professionals. Floor wax slurry does not stand a chance! You can recover solutions with the front mount squeegee or with the included tool kit.
You can have complete confidence in this machine because it comes backed by an industry-leading 8-year warranty on the housing, 3 years on parts, 2 years on labor & 180 days for travel. You no longer have to worry when stripping floors, recovering debris, and doing flood restoration work. The vacuum motor is guaranteed to be free of defects, but this does not cover overfilling the machine or sucking foam through the motor. The machine does have a float shut-off that shuts the machine down when it fills up, but we always recommend using a defoamer when running this machine.
If this is not the exact machine you need for your job, please feel free to take a look at our full line of high efficiency floor finish removal tools for other options.
Features
- Recovers any type of liquid - stripper, slurry, water, etc.
- Tool kit can be used to recover liquid from any area.
- Industry leading warranty - 8 years on the housing, 3 years on parts, 2 years on labor & 180 days for travel.
- 18 gallon solution tank with rear dump hose.
Starter Packages
Quick Overview
- 18 Gallon Capacity
- Front Mount Squeegee & 5-Piece Accessory Kit Included
- Roto-molded Body
- 1.17 HP Motor
Tips from our SuperFreak Service Technicians
Tim C says - "You need to use a defoamer whenever you're recovering liquids with this vacuum, especially if you're stripping floors or dealing with any type of slurry solution. Failure to use a defoamer can cause the seal plate on the end of the ball float to become so hot that it starts to melt and weld itself to the bottom of the vac motor assembly. This prevents the seal plate from dropping back down when the recovery tank is emptied, resulting in a blockage and total loss of suction. Replacing the seal plate requires disassembling the entire vacuum, which voids the warranty. So, to reiterate, we always recommend using a defoaming product in any water recovery scenario with this vacuum."
Maintenance Tips
- Use defoamer with each use, either by pouring directly into the recovery tank or by sucking a few ounces up through the front mount squeegee or through the handheld tools.
- Before & after each use, make sure the ball float is moving freely.
- Wipe down the squeegee blades after each use to avoid build-up and remove any chemicals still on the blades. Many chemicals if left on a squeegee can cause warping or deterioration.
- Empty out & clean the machine after each use.